FUVALVE(XIAMEN) CO.,LTD
TEL:0592-8930516
FAX:0592-3780866
E-mail:sales@ceramic-valves.com
Specification:
Type |
Partial Lined Ceramic Ball Valves |
Size |
DN15-DN300(1/2”-12”) |
Pressure Rating |
PN10,PN16,PN25,PN40,PN63,CL150,CL300,CL600,JIS 10K, JIS 16K , JIS 20K, JIS 40K |
Body Material |
A105, SS304, SS316, SS316L, F51, 2205 |
Trim Material |
ZrO2, 99% Al2O3,99.7%Al2O3,SSIC, STC, Si3N4 |
End Connection |
Flange End as per ASME B16.5, EN1092-1, JIS B2220, Butt Welding End as per ASME B16.25 |
Features:
The valve body is thickened and strengthened(than GB,JB,ANSI).And it can be made into two or three sections if necessary.As a result,the valve will not be distorted and locked because of gravity.
The Strengthened hard seal ceramic ball valve is designed for the medium which contains fiber,slurry and high-hardness particle,applicable to pipe-line transportation and emission of Silicon powder,magnesium powder and lime.
The ceramic ball and seat inside are hard sealed so that the valve can be zero leakage ,economical,practical.
Nominal Diameter:DN15-DN200
Nominal Pressure:1.0-4.0-6.8MPa
Suitable Temperature:-40 to 280/450 Deg C